The AleoBlue™ 4-Button Scene Selector puts on/off, dimming and two preset scenes on a single wall plate — with no wires, no batteries and no maintenance. Each press generates its own power and transmits a Bluetooth® signal to the AleoBlue™ network, so the switch installs in a standard single-gang wall box in minutes without pulling line voltage or control wiring. The top two buttons turn the zone on and off and raise and lower the light level; the bottom two recall Scene A and Scene B, each defined per zone in the AleoBlue™ app. Because the switch transmits only when pressed, it is paired to a zone by scanning its QR code rather than being provisioned as a mesh node — it adds no traffic to the network and does not count toward the device limit for the area.